manualshive.com logo in svg

AIXTRON CRIUS II, Системное руководство

Поделиться
Скачать
AIXTRON CRIUS II Скачать руководство пользователя страница 18

cr

ius_I

I_e

n_

00,

 Ed

it

io

n 

06/

201

0

18

CONFIDENTIAL

AIXTRON

 - Dokumentation

Safety

System Manual

Introduction

CRIUS II

2

2.1

Introduction

2.1.1

Compulsory reading material!

2.1.2

Residual dangers

The CRIUS II is constructed according to the most recent state of the art tech-
nology and to the officially approved safety regulations. The equipment has 
been subjected to a meticulous safety check and a safety acceptance test.

However it is impossible to rule out the possibility of residual dangers during 
operation. Hazards exist:

•

For personal safety of the operator

•

For the CRIUS II and other property

For this reason, all work carried out in conjunction with the CRIUS II must be 
performed by trained personnel only and in accordance with this System Man-
ual. The technical data must be observed on principle.

2.1.3

Responsibilities regarding safety

AIXTRON scope of responsibility

AIXTRON is responsible for the safety of the CRIUS II.

End user scope of responsibility

The end user is responsible for safety in the workspace around the CRIUS II. 
The end user is also responsible for making sure that all safety regulations 
pertaining to work at the CRIUS II are adhered to.

NOTE:

Read this chapter prior to any work at the CRIUS II! It contains important 
information for your own personal safety. This chapter must have been 
read and understood by all persons who work at the CRIUS II during any 
stage of its serviceable life.

Содержание CRIUS II



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды