Airxcel Aqua-Hot 200 Series, Руководство по обслуживанию

Страница: 17 / 105

Controller
©Aqua-Hot®
250-D03 Diesel Series Service Manual REV 220302
p. 17
Instructions for Controller Setup after Installation:
1. Provide power to the main harness of the Aqua-Hot. After the screen lights up, tap the three lines icon on the bottom right
corner. Tap the AQUA-HOT DIAGNOSTICS icon. Then tap and hold (for 3 seconds) within the Aqua-Hot Information section.
Tap SERIAL NUMBER and follow the prompts on the screen.
2. On the Diagnostics page, tap and hold (for 3 seconds) in the Aqua-Hot Information section. Tap OPTIONS, CLIMATE ZONES,
and select the number of climate zones (A). Choose a label and temperature input type for each zone (B). Tap BACK until
you’ve reached the Home Screen.
Figure 21
Tap and hold 3
seconds anywhere
in this section
Tap and hold 3
seconds anywhere
in this section
A
B
Figure 22