AirStage AO54FJ, Руководство по обслуживанию

Страница: 8 / 169

01-03
MANUAL AUTO
(5) Press the START/STOP button and make sure the
beeping sound is heard.
(1) Press the SLEEP button.
(1) Press the Manual Auto Button 3 sec. (2) Press the ACL button.
OPERATION
(RED)
TIMER
(GREEN)
CORRECT : Pi PiPiPiPiPi
WRONG: Pi (3 sec)
ACL
01 02 03
01
4. Check Address setting
5. Completion of Address setting mode
6. Setting up each Indoor unit
continuously
Flashing times of
address numbers
Operation lamp
turns off
Timer lamp keep blinks the number of times of address No.
"2" is needed when custom
code is different.
Address can be checked
by the number of blinking
of Timer Lamp.
After pressing the ACL
button, please set the
custom code again
if b,c,d setting.
7. Reset the power after setting up address of all Indoor units.
*
If the reset is not performed, address can not be read in normally.
(6) Indoor unit is displayed address number.
ON
OFF
(Example) ADDRESS : 03
OPERATION
LAMP
(RED)
ON
OFF
TIMER
LAMP
(GREEN)
PiPi
Pi PiPiPi
PiPi
PiPi
Repeat the "1" "5" operation.