AirStage AO54FJ, Руководство по обслуживанию

Страница: 13 / 169

3) Simple remote controller
Stop the indoor and outdoor units. Push the remote controller
SET
button and button
simultaneously for more than three seconds. The air conditioner will start to conduct a test
run and " " will display on the temperature display.
display.
However the
setting button does not have function but all other buttons,
displays and protection functions will operate.
To stop test running press the button of the simple remote controller.
For the operation method refer to the operating manual and perform operation check.
Check that there are no abnormal sounds or vibration sounds during test run operation.
01-08
1) When the test run signal is transmitted from standard wired, wireless remote controller, simple remote controller
and central remote controller.
(1) The test runn operation starts and the electric expansion valve is controlled to a maximum flow, regardless of
the temperature condition.
(2) De-frosting and frost prevention operation has priority over item(1).
(3) After 60 minutes passes, the test run stops.
2) When the test run signal is transmitted from the outdoor unit.
(1) Whether state of the indoor unit operates or stops, All units in the same refrigerant system will start to conduct a
test run in accordance with the operation mode set by DIP SW 1-1 or SW 1-2 of outdoor unit ( see 1 - 3 - 1 ).
(2) Test running initialization is shown below.
Fan speed Hi Hi
Room Temperature Indication 18 30
Vertical Air Direction Panel
Horizontal Air Direction Panel
Swing
Operating Mode Cooling Heating
OFF OFF
1-4 TEST RUN CONTROL
Position 1 Position or
4 6
Position 3 Position 3
Please refer to "5-4 LOUVER CONTROL" in this manual and find the definition
for air direction panel position.