Lennox iHarmony 10C16, Руководство по установке

Страница: 1 / 16

CONTROLS
KITS AND ACCESSORIES
©
2018 Lennox Industries Inc.
Dallas, Texas USA
iHarmony
®
Zoning System
507132-03
6/2018
Supersedes 4/2018
INSTALLATION INSTRUCTIONS FOR IHARMONY ZONING SYSTEM (10C16)
THIS MANUAL MUST BE LEFT WITH THE OWNER
FOR FUTURE REFERENCE
WARNING
Installation and service must be performed by a li censed
professional HVAC installer (or equivalent) or a service
agency.
Shipping and Packing List
Kit (10C16) consists of the following:
1 - Damper control module assembly
1 - Discharge air temperature sensor (88K3801)
4 - Screws (#6-20 x ⅜, Phillips pan-head type 25)
1 - Freeze-stat jumper (pre-installed on damper control)
1 - Warranty sheet
General
The damper control module is compatible with the
following Lennox equipment:
• iComfort Wi-Fi
®
thermostat (10F81) or (88W58) with
software version 2.13 or higher
• iComfort S30 Ultra Smart Thermostat (12U67)
• Lennox communicating variable speed or variable
capacity (modulating) indoor and two-stage or variable
capacity (modulating) outdoor units.
• Lennox communicating variable speed indoor unit and
communicating or non-communicating (conventional)
single-stage outdoor unit (two zones maximum
supported).
• Lennox communicating variable speed indoor unit and
communicating or non-communicating (conventional)
two-stage outdoor unit (four zones maximum supported).
Table of Contents
Shipping and Packing List ........................................... 1
General .......................................................................... 1
Required Items Sold Separately.................................. 2
Recommended Items Sold Separately ....................... 2
Zoning Components ..................................................... 2
Transformer Phasing ............................................................. 2
Dampers ............................................................................... 3
Discharge Air Temperature Sensor - DATS .......................... 3
DATS Temperature / Resistance Chart ................................. 4
Pressure Switch .................................................................... 4
Staged Heat Pump Units ...................................................... 4
Modulating Heat Pump Unit (XP20 and XP25) ..................... 4
Freezestat (Optional) ............................................................ 5
Setup and Configuration .............................................. 5
Damper Control Module Jumper Settings, LEDs and
Connections .......................................................................... 5
Lennox Communicating Indoor Control Link Settings ........... 6
iComfort Wi-Fi Thermostat - Installer Zoning
Control Settings ............................................................ 8
Zoning Control Parameters ................................................... 8
Zoning System Parameters .................................................. 8
To Edit and Test Airflow Per Zone ......................................... 9
Recording Airflow Information ............................................... 9
iComfort S30 Thermostat - Installer Zoning
Control Settings .......................................................... 10
Zoning Control Parameters ................................................. 10
Zoning System Parameters ................................................ 10
Zoning Sequence of Operations ............................... 11
Heating / Cooling Changeover .............................................11
Damper Operation ...............................................................11
Dual-fuel Operation ............................................................. 12
Emergency Heat Operation - Heat Pump Systems ........... 12
Humidity Control ........................................................ 12
Soft Disable ................................................................. 12
iComfort Wi-Fi ..................................................................... 12
iComfort S30 Thermostat .................................................... 12
Minimum CFM for Zoning System with Variable
Speed Blower Motors ................................................. 13
Zoning Alert Codes .................................................... 14