SOLO GA | User’s manual
7
4. START UP
4.1 ACTIVATING PROCEDURES
1.
Start your preferred flight simulation software (MSFS,
Prepar3D or X-Plane 11).
2.
Press the push button (a) indicated below to start the
"Windows" operating system of the SOLO GA's mini computer.
The device will be ready to operate after about 60 seconds,
when you will see the "SELECT PANEL TYPE SCREEN"
displayed in the next image picture. Follow "PANEL
SELECTION (ACCORDING TO AIRCRAFT)" from section 5 to
select the panel from the aircraft you wish to fly
a
The SOLO GA must not be disconnected while
the programs are loading. Doing so might cause
problems with booting in the future.
3.
Execute the VFConnect version that corresponds to
the simulation software running. If the Windows firewall is
activated, a warning permission to communicate with networks
might appear. You must click "Allow Access" to enable the
connection between the SOLO GA and the computer.
Depending on the flight simulation software you use, the
connection time will vary.
