SOLO GA | User’s manual
21
Pressed > 2 seconds enables the
countdown mode (ET blinking)
Clear the last
number inserted
Automatic
VFR code
XPDR's Code
Mode selector
7.6 TRANSPONDER XPDR:
100% functional including the flight level in ALT mode.
When inputting values with the keyboard, a dash appears in
the digit that waits to be changed.
Mode selector:
This can be changed by pressing the caption (OFF, SBY,
TST, ON, ALT) or with the rotatory knob. The mouse's cursor
changes to a hand or an arrow depending it's position near
the knob. The selected mode appears lit on the screen
(except OFF). The TST mode lights all indicators.
COUNTDOWN MODE (ET blinking)
A countdown of a maximum of 59 minutes, 59 seconds is
allowed. To enter countdown mode, the SET/RST pushbutton
must be pressed and mintained (with the mouse) for 2 seconds
or longer, or until ET starts to blink.
Subsequently, you should select the initial time with the
rotatory knobs, the big one to select the minutes and the
small for the seconds, and press the SET/RST pushbutton to
start the countdown.
When the time reaches 0 the mode reverts to normal ET
Mode and begins to count up, but to advise you of the time
blinks for 15 seconds.
IDT:
Simulated action showing the "R" caption for 18 seconds.
0 a 7:
Direct entry os XPDR's code. Code is inserted
sequentially; if the code is not completed in a reasonable time
(more than 4 seconds from the last insertion) the code reverts
to the last used code.
