SOLO GA | User’s manual
16
Device description
The order in wich the devices appear, if activated, is fixed: see
diagram on previous page.
7.1 AUDIO PANEL AND MARKERS
The user can select which audio channel to receive and
transmit; it also includes an approach radiobeacon (marker)
lights.
"Active" buttons are shown smaller and darker, to simulate
the fact that they have been pressed. Speaker and Phone
buttons are linked and will always be de/activated together,
regardless of wich is pressed first.
The picture shows some buttons pressed (ON) and some
depressed (OFF).
TRANSMITTERS
The NAV1, NAV2, DME, MKR and ADF buttons are used to
listen and identificate the Morse code associated with the
currently tuned station.
IMPORTANT:
To activate NAV1 or NAV2, it is mandatory
that the "Ident" knobs in respective COM/NAV radios are
pulled, otherwise it won't be activated. To make it easier,
the Options screen allows for a "Linked" option that will
automatically press the corresponding button in the audio
panel whenthe Ident knob on the radios are pulled.
OBLIGATORY SELECTION OF COM1 OR COM2
The transmitter channel (COM1 or COM2) is selected
automatically as the received audio channel be deactivated
(it is a FS restriction).
DUAL RECEPTION
It is permitted to activate both COM1 and COM2 audio,
simultaneously.
NOTE: Not all the buttons work; inoperative buttons are:
MKR Sens, TEL and AUTO. MIC switch only works with
COM1 or COM2.
7.2 AUTO-PILOT (AP) 'KFC 225 like'
Peixsoft GA Radio Stack Displays UDP for Virtual Fly
This modified version shows, and allows modification
of, values from the simulator's autopilot. It also provides
information about active and armed modes.
Transmitter selector
(Only available: COM1 & COM2)
