SOLO GA | User’s manual
14
MSFS/Prepar3D: STOPPING TURBOPROP ENGINES
1.
Pull on the
PARKING BRAKE
.
2.
Move the
MIXTURE
lever to
CUTOFF
position.
3.
Switch off
M. AVIONICS
switch.
4.
Switch off the
GEN
switch(es).
5.
Switch off the
BAT
switch.
The diagram below shows the position of every switch in
the SOLO GA along with the step that corresponds to their
application when stopping the turboprop engine.
2
5
4
3
1
X-Plane 11: STARTING & STOPPING TURBOPROP ENGINES
To start and stop a turboprop engine aircraft in X-Plane 11,
please refer to the selected aircraft's Pilot Operating Manual.
This can be found instide the corresponding aircraft's folder
within:
X-Plane 11\Aircraft\Laminar Research.
Once the Pilot
Operating Manual of the corresponding aircraft is open, locate
the "Checklists" section and follow the detailed instructions
for starting and stopping the engines.
