SOLO GA | User’s manual
23
Anomaly
Possible Cause
Solution
MSFS/ Prepar3D/ X-Plane
11 do not connect to the
panel.
Network cable nº 3 is not connected. Check connection of network cable nº 3 between SOLO and MFS
/ P3D / X-Plane computer.
MFS / P3D / X-Plane is not running.
Execute MFS / P3D / X-Plane.
FSUIPC is not installed (MFS/P3D).
Install FSUIPC. See Chapter 2.
“VFConnect3.exe” or “VFConnect3-
Xplane.exe” is not executed.
Execute “VFConnect3-Xplane.exe” on the MSF / P3D / X-Plane
computer.
“VFConnect3.exe” or “VFConnect3-
Xplane.exe” started incorrectly.
Only one of “VFConnect” or “VFConnect-Xplane” can be execu-
ted at the same time, be sure that you are executed the version
that corresponds on your simulation software. “VFConnect” will
only work with MFS/P3D and VFConnect-Xplane will only work
with X-Plane.
Windows firewall does not allow
communication with SOLO.
You will have to add an exception manually to allow communica-
tion. For that, follow the steps below:
1. Press combo key W R.
2. Write “firewall.cpl” on the window that has appeared.
8. TROUBLESHOOTING
