SOLO GA | User’s manual
15
7. RADIOSTACK
The Radiostack's screen is a touchscreen, so you must press
the buttons in the screen to activate them. Only the numerical
values have to be changed with the real rotary knobs located
at right side of the Radiostack.
Some options may differ a bit depending on the simulation
software you are using (MFS/P3D or X-Plane), these differences
are detailed in the following instructions.
Definition of rotary knobs
ALT SEL (MFS/P3D):
Rotate to change the ALTITUDE in increments of "100 feet"
or rotate whilst pressing the knob to change the ALTITUDE in
increments of "1000 feet".
COM frequencies:
Rotate to change the decimal of the frequency in increments
of "0.025" or rotate keeping the knob pressed to change the
integers in increments of "1.00".
NAV frequencies:
Rotate to change the decimal of the frequency in increments
of "0.05" or rotate whilst pressing the knob to change the
integers in increments of "1.00".
ADF frequency:
Rotate to change the frequency in increments of "000.1" or
rotate keeping the knob pressed to change the frequency in
increments of "010.0".
Audio panel
& Markers
Autopilot
Distance
Measurement
Eq. (DME 1&2)
Automatic
Direction
Finder (ADF)
Transponder
(XPDR)
Communication
& Navigation 1
Communication
& Navigation 2
XPDR Tansponder:
Rotate in order to switch the selector to the different posi-
tions: OFF, SBY, TST, ON, ALT
