Chapter 5 BMC Configuration and Settings
114
Apollo User's Manual
To set system firewall for a range of Port addresses
Click the Port tab. A sample screenshot of Port tab is shown below.
The fields of System Firewall - Port tab are explained below.
Port/Port Range:
Lists all the configured Port Address or Range of
Ports.
Protocol:
Lists all the configured protocols of particular port or port
ranges.
Port Settings:
To indicate the corresponding Port or Range of Ports
rules that Allow or Block.
Advanced Settings:
To configure the Advanced Firewall Settings
Options are Block all and Flush all.
Add:
To add a new entry to the port entry.
Delete:
To delete the selected slot.
Procedure
To block or Allow the Port address
1. To add a new rage of Port address, click the Add button.
2. In the
Add new rule for Port
window, Enter the port address or a
range of port addresses in the
Port/Port range field
.
3. Select the
Protocol
to be either TCP or UDP.
4. Select the
Port Setting
to be either
Block
or
Allow
. Port Settings
are used to determine the rule whether block or allow from the
configured Port or Port Range.
Note :
Port value ranges from 1 to 65535.
Содержание apollo
Страница 1: ...Apollo Server MotherBoard User s Manual UM_Apollo_v 1_120716...
Страница 3: ...5 4 7 Maintenance Group 144 5 4 8 Firmware Update 153 Chapter 6 Technical Support 159 contents...
Страница 31: ...Chapter 5 BMC Configuration and Settings 25 Apollo User s Manual 2 Input IP address Set static IP...
Страница 32: ...Chapter 5 BMC Configuration and Settings 26 Apollo User s Manual 3 Input subnet mask address...