manualshive.com logo in svg

AIC apollo, Руководство пользователя

Поделиться
Скачать
AIC apollo Скачать руководство пользователя страница 161

Chapter 5 BMC Configuration and Settings

155

Apollo User's Manual

The various fields of Firmware Update are as follows.

Current Active Page:

 Displays the name of current active page.

Image to be uploaded:

 List of images to be uploaded. If required 

both the images can be chosen.

Reboot the device after update:

 Option to reboot the machine after 

the update is done.

Preserve All Configurations: To preserve all the listed configurations.

Enter Preserve Configuration:

 To redirect to the Preserve 

Configuration page.

Enter Update Mode: To upgrade the current device firmware.

Procedure

1.  Check the option 

Preserve All Configuration

 to preserve all the 

listed configurations.

2.  Click 

Enter Preserve Configuration

 to redirect to 

Preserve 

Configuration

 page, which is used to preserve the particular 

configuration not to be overwritten by the default configuration.

3.  Select the image to be updated from 

Image to be updated

 drop-

down list.

4.  Check the option 

Reboot the device after update

 if required.

5.  Click 

Enter Update Mode to upgrade the current device firmware. 

The Firmware update undergoes the following steps:

a. Closing all active client requests

b. Preparing Device for Firmware Upgrade

c. Uploading Firmware Image

• 

Browse and select the Firmware image to flash and click Upload

.

Warning : 

Please note that after entering the update mode, the widgets, other web 
pages and servic¬es will not work. All the open widgets will be automati-
cally closed. If the upgradation is cancelled in the middle of the wizard, 
the device will be reset.

Note : 
To  configure P rotocol i nformation, c hoose  “Image  Transfer P rotocol” 
under Firmware Update menu.

Note : 
A file upload pop-up will be displayed for http/https but in the case of tftp 
files, the file is automatically uploaded displaying the status of upload.

Содержание apollo






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды