Chapter 5 BMC Configuration and Settings
85
Apollo User's Manual
4. In the
Filter Action Configuration
section,
• Event Filter Action is a mandatory field and checked by default,
which enable PEF Alert action (read-only).
• Select any one of the
Power Action
either Power down, Power
reset or Power cycle from the drop down list
•
Choose any one of the configured Alert Policy Number
from the
drop down list.
5. In the
Generator ID configuration section
• Check
Generator ID Data option to fill the Generator ID with raw
data.
• Generator ID 1 field is used to give raw generator ID1 data value.
• Generator ID 2 field is used to give raw generator ID2 data value.
• In the
Event Generator
section, choose the event generator as
Slave Address - if event was generated from IPMB.Otherwise
as System Software ID - if event was generated from sys¬tem
software.
• In the
Slave Address/Software ID field, specify corresponding I2C
Slave Address or System Software ID.
• Choose the particular
Channel Number
that event message was
received over. Or choose ‘0’ if the event message was received
via the system interface, primary IPMB, or internally generated by
the BMC.
• Choose the corresponding
IPMB Device LUN
if event generated
by IPMB.
6. In the
Sensor configuration
section
• Select the sensor type of sensor that will trigger the event filter
action.
• In the sensor name field, choose the particular sensor from the
sensor list.
• Choose event option to be either All Events or Sensor Specific
Events.
Note :
Alert Policy h as t o be c onfigured - under Configuration
PEF
Alert
Policy.
Note :
In RAW data field, to specify hexadecimal value prefix with ‘0x’.
Содержание apollo
Страница 1: ...Apollo Server MotherBoard User s Manual UM_Apollo_v 1_120716...
Страница 3: ...5 4 7 Maintenance Group 144 5 4 8 Firmware Update 153 Chapter 6 Technical Support 159 contents...
Страница 31: ...Chapter 5 BMC Configuration and Settings 25 Apollo User s Manual 2 Input IP address Set static IP...
Страница 32: ...Chapter 5 BMC Configuration and Settings 26 Apollo User s Manual 3 Input subnet mask address...