Chapter 5 BMC Configuration and Settings
78
Apollo User's Manual
5.4.4.11 Network Link
In MegaRAC GUI, this page is used to configure the network link
configuration for available network interfaces.
To open Network Link page, click
Configuration→Network Link
from
the menu bar. A sample screenshot of Network Link Page is shown
below.
The fields of Network Link page are explained below.
LAN Interface:
Select the required network interface from the list to
which the Link speed and duplex mode to be configured.
Auto Negotiation:
This option is enabled to allow the device to
perform automatic configuration to achieve the best possible mode
of operation (speed and duplex) over a link.
Link Speed:
Link speed will list all the supported capabilities of the
network interface. It can be 10/100/1000 Mbps.
Duplex Mode:
Duplex Mode could be either Half Duplex or Full
Duplex.
Save:
To save the settings.
Reset: To reset the modified changes
Содержание apollo
Страница 1: ...Apollo Server MotherBoard User s Manual UM_Apollo_v 1_120716...
Страница 3: ...5 4 7 Maintenance Group 144 5 4 8 Firmware Update 153 Chapter 6 Technical Support 159 contents...
Страница 31: ...Chapter 5 BMC Configuration and Settings 25 Apollo User s Manual 2 Input IP address Set static IP...
Страница 32: ...Chapter 5 BMC Configuration and Settings 26 Apollo User s Manual 3 Input subnet mask address...