AIC apollo, Руководство пользователя

Страница: 118 / 165

Chapter 5 BMC Configuration and Settings
112
Apollo User's Manual
5.4.4.20 System Firewall
In MegaRAC GUI, the System Firewall page allows you to configure
the firewall settings. The firewall can be set for a range or IP
Addresses or Port Addresses. To view this page, you must at least be
an operator. Only administrators can add or delete a firewall.
To open System Firewall page, click Configuration→System Firewall
from the menu bar.
Advanced Settings
1. Click on the Advanced Settings button. This opens the Advanced
Firewall Settings window as shown below.
2� Block All blocks all the incoming IP’s and Port’s. Check this option
to enable this feature.
3� Flush All is to flush all the system firewall rules. Check this option to
enable this feature.
4. Click Save to save the changes made else click Cancel to go
back to the previous screen.
To set system firewall for a range of IP addresses
Click the IP Address tab. A sample screenshot of IP address tab is
shown below.
The fields of System Firewall - IP Address tab are explained below.
IP/IP Address Range : Lists all the IP Address or Range of IP Addresses