AIC apollo, Руководство пользователя

Страница: 68 / 165

Chapter 5 BMC Configuration and Settings
62
Apollo User's Manual
a
Local Media
This tab displays the list of available images in the local media on
BMC. You can replace or add new images from here. To configure
the image, you need to enable Local Media support under Images
Redirection→IAdvanced Settings . Once you enable this option, the
user can add the images and the added images will be redirected
to the host machine.
The fields of Local Media tab is as follows:
Add Image: To upload a new image to the device.
Replace Image: To replace the existing image.
Delete Image: To delete the desired image.
Procedure:
1. To add, remove or modify images, click Advanced Settings
and make sure Local Media Support option is enabled. If not,
disable Remote Media Redirection and then enable Local Media
Redirection.
2. Click on the Local Media Tab.
3. To add an image, select a free slot and click Add Image to
upload a new image to the device. Alternatively, double click on
a free slot to add an image. A sample screenshot of Add Image
screen is given below.
4. To replace an image, select a configured slot and click Replace
Image to replace the existing image. Alternatively, double click
on the configured slot.
5� Browse the image File and click Replace
6. To delete an image, select a record and click Delete Image to
delete the selected image.
Note :
To replace or add an image, you must have Administrator Privileges.
Only one image can be uploaded for each image type. If the existing
image and uploading image name is same, then a message i s shown
“Image already exists”.
In Local Media redirection, the maximum upload size is 8MB.