AIC apollo Скачать руководство пользователя страница 152

Страница: 152 / 165

Chapter 5 BMC Configuration and Settings

146

Apollo User's Manual

Files Preserved

SDR

Following files will be preserved.

SDR�dat:

This file contains the sensor data record information that is

used in IPMI.

Dependency Configurations: NIL

FRU

Following files will be preserved.

FRU�bin: This file contains the logical field replaceable unit data that

are used by IPMI

Dependency Configurations: SDR

SEL

Following files will be preserved when Delete SEL reclaim space is

disabled.

SEL�dat: This file contains the system event logs that are being logged

by the IPMI.

Following files will be preserved when Delete SEL reclaim space is

enabled.

Selreclaiminfo.ini –The file contains the SEL repository information.

SEL folder –This folder contains the multiple files of event logs.

Dependency Configurations – IPMI

IPMI

The following files are preserved in IPMI configuration.

IPMI�conf:This file contains the IPMI configurations such as SEL rep size,

SDR rep size, interface specific, enable/disable, Primary/Secondary,

IPMB Bus number etc.

dcmi�conf:

This file contains the DCMI1.5 specification parameters

such as DHCP Timing1, DHCP Timing2, DHCP Timing3. The files are

preserved only when DCMI1.5 feature is enabled in the MDS project

configuration.

pwdEncKey: This file contains the keys that are used to decrypt the

passwords. When the user password option is enabled in the MDS

project configuration, this file will be preserved.

Dependency Configurations - NIL

Network

Following files will be preserved.

dhcp�conf: This file is to configure the host name in the FQDN format.

dns�conf:

This file is used to configure the DNS registration method

and DNS server for the particular interface.

hostname: This file is used to store the Hostname of the BMC.

hostname�conf: This file is used to configure the host name creation

method Manual/Automatic for the BMC.

Vlaninterfaces:

This file helps to enable the vlan interface for the

Содержание apollo






































































































































































Результаты поиска

Содержание apollo

Отзывы:

Бренды по названию

Популярные бренды

AIC apollo, Руководство пользователя

Результаты поиска

Содержание apollo

Отзывы:

Бренды по названию

Популярные бренды