INSTRUCTIONS FOR USE
AGS 1800 - 2000 EN-HV (HVB)
Rev.9/2018
98
Figure 14.4
Legend of Figure 14.4
1 Tensioner
2 Tensioning screw
3 Adjustable screw for arm positioning
4.
When the spray boom is in the working position, the wire rope must be kept tight. If the wire
rope is too loose, the arms will oscillate forwards and backwards during operation, which
reduces the spraying quality and, at the same time, may cause damage to vital components of
the spray boom.
Figure 14.5
5.
Adjust the tension with the tensioning screw (Figure 14.4). When the wire rope is well strained,
the arm should "bend" slightly in the driving direction. It should not bend more than 10 cm
from the end of the spray boom.
6.
After the spray boom is "open", adjust the working height, unblock the boom and adjust the tilt.
The tilt adjustments are described in the chapter TRAPEZE SUSPENSION.
7.
Repeat the steps in reverse order to close the spray boom.
8.
The rear arm is protected with a safety hinge. If the sprayer encounters an obstacle, the rear arm
moves away and then automatically returns to the original position.
3
2
1
Содержание 12 HLX
Страница 2: ...INSTRUCTIONS FOR USE AGS 1800 2000 EN HV HVB Rev 9 2018 1...
Страница 24: ...INSTRUCTIONS FOR USE AGS 1800 2000 EN HV HVB Rev 9 2018 23 4 2 SPRAYER COMPONENT PARTS Figure 4 4...
Страница 28: ...INSTRUCTIONS FOR USE AGS 1800 2000 EN HV HVB Rev 9 2018 27 4 4 FUNCTION SCHEME Figure 4 5...
