INSTRUCTIONS FOR USE
AGS 1800 - 2000 EN-HV (HVB)
Rev.9/2018
34
Figure 7.2
7.2
MAIN RESERVOIR
The main reservoir is made of polyethylene which is resistant to chemicals. It has rounded edges and
smooth inner walls for easier cleaning. The reservoir has a sloping bottom which assures a complete
emptying of it. There is a sieve with cover mounted on the top of the reservoir. Do not remove the
sieve while filling the reservoir with insecticide or water!
The front side of the base contains a litre scale for easier measurement of the spray quantity in the
main tank.
The cover consists of one part with lever, through which the float valve mechanism for ensuring
aeration and prevention of water leaking from the reservoir on the bottom side. The cover is opened by
turning in clockwise direction and closed in reverse order (see marking on the cover). Reservoir cover
must be closed while working. We recommend using clean water for filling.
When filling the reservoir, never insert the hose through cover into the reservoir or allow contact
between spray and filling hose, as pollution of supply part of the hose may arise. Due to pressure fall,
spray can flow back to filling hose.
WARNING: Use protective equipment when handling sprays!
Содержание 12 HLX
Страница 2: ...INSTRUCTIONS FOR USE AGS 1800 2000 EN HV HVB Rev 9 2018 1...
Страница 24: ...INSTRUCTIONS FOR USE AGS 1800 2000 EN HV HVB Rev 9 2018 23 4 2 SPRAYER COMPONENT PARTS Figure 4 4...
Страница 28: ...INSTRUCTIONS FOR USE AGS 1800 2000 EN HV HVB Rev 9 2018 27 4 4 FUNCTION SCHEME Figure 4 5...
