Agria 5400 KL Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 68

Agria 5400 KL Скачать руководство пользователя страница 9

agria

Power Mower 5400

9

1. Safety Instructions

Before starting the engine, read the op-
erating instructions and note:

Warning

This symbol marks all paragraphs which
affect your safety. Pass all safety instruc-
tions to other users and operators.

Due use

The power mower is constructed solely
for the cutting of grass and similar plants
as well as thin non-wooded scrub in land
& forest management, green spaces,
and other such areas and may also be
used as a snow-clearing machine after
it has been fitted with a suitable rake
blade (due use).

Any other type of operation is consid-
ered undue. The manufacturer is not li-
able for any damages resulting from
undue use, for which the risk lies with
the user alone.

When the power mower is used on pub-
lic roads, the local national road traffic
rules must be observed, e.g. reflectors,
lights.

The power mower is not intended for use
with a trailer on public roads or as as a
tractive machine.

Due use includes compliance with
manufacturer’s instructions on opera-
tion, maintenance and repair.

Any unauthorized changes to the mower
render manufacturer liability null and
void.

General Instructions on
Safety and Accident
Prevention

Basic Rule:

The standard accident prevention regu-
lations must be adhered to, as well as
all other generally accepted rules gov-
erning operational safety, occupational
health and road traffic regulations.

For drives on public roads, the national
traffic code applies.

Accordingly, check the power mower for
road and operational safety each time
you take up operation.

Only persons familiar with the mower
and instructed on the hazards of opera-
tion are allowed to use, maintain and
repair the mower.

Teenagers of 16 years or younger may
not operate the power mower!

Only work in good light and visibility.

Operator’s clothes should fit tight. Avoid
wearing loose fitting clothes. Wear solid
shoes.

Note the warning and instruction signs
on the mower for safe operation. Com-
pliance is for your own safety.

When transporting the mower on vehi-
cles or trailers outside the area to be
mowed, ensure that the engine is turned
off.

Careful with rotating tools – keep at a
safe distance!

1

«
...
7
8
9
10
11
...
»

Содержание 5400 KL





































































Отзывы:

Нет отзывов