Agria 5400 KL Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 68

Agria 5400 KL Скачать руководство пользователя страница 21

agria

Power Mower 5400

21

l

Watch for the correct clutch play to avoid clutch slip-

ping away during operation.

I

With engine running, don't park mower with hand

clutch lever pulled for a longer period, this may

damage the clutch.
With engine stopped, always park mower with hand clutch
lever pulled (pawl locked in place). Otherwise, clutch prob-
lems may result due to corrosion.

Clutch

Power Mower 5400 KL

The operation of the dry bevel clutch is
via the hand clutch lever (D/6).

l

The ma-

chine is de-
coupled when
you pull the
hand lever to
position "0",
the engine
stops driving
the mower.

l

The pulled hand lever can be locked

with pawl (D/7).

Clutch / Mountain Park
Brake

Power Mower 5400

Operation of clutch and mountain park
brake is via the hand lever (B/3).
The mountain park brake serves to stop
and to change gears on slopes.

l

The ma-

chine is de-
coupled when
you pull the
hand lever to
position "0",
the engine
stops driving
the mower.

l

The pulled hand lever can be locked

with pawl (B/4).

l

When You

keep pulling
the hand lever,
the mountain
park brake is
engaged.

3. Devices and Operating Elements

3

B/3

D/3

D/4

B/4

47

«
...
19
20
21
22
23
...
»

Содержание 5400 KL





































































Отзывы:

Нет отзывов