Agria 5400 KL Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 68

Agria 5400 KL Скачать руководство пользователя страница 6

6

agria

Power Mower 5400

Recommendations

Lubricants and Anti-
Corrosive Agents:

Use the specified lubricants for engine
and gearbox (see “Specifications”).

We recommend using bio- lubricat-
ing oil or bio-lubricating grease for
“open” lubricating points or nipples (as
specified in the operating instructions).

We recommend using bio-slushing
oil for preservation of machines and
implements (do not apply on painted
external covers). Oil can be brushed
or sprayed on

Anti-corrosive agents are environmen-
tally friendly and degrade fast.

Using ecologically safe bio-lubricants
and bio-anti-corrosives, you contrib-
ute to environmental protection and to
the wellbeing of humans, animals and
plants.

Maintenance and Repair:

The trained mechanics of your agria
workshop carry out expert mainte-
nance and repair.

You should only carry out major main-
tenance work and repairs on your own,
if you have the proper tools and knowl-
edge of machines and internal com-
bustion engines.

Do not hammer against the flywheel
with a hard object or metal tools as it
might crack and shatter in operation
causing injuries and damage. Only
use suitable tools for pulling the fly-
wheel.

Fuel:

This 4-stroke engine runs smoothly
on commercial unleaded regular and
supergrade petrol (including E10)
as well as Super plus.

Do not add oil to petrol.

If, for environmental reasons, you
use unleaded petrol, make sure the
fuel is drained completely when shut-
ting down the engine for more than
30 days. This is to prevent resin resi-
due from depositing in the carburet-
tor, fuel filter, and tank. Or add a fuel
stabilizer.

For further instructions refer to “En-
gine Preservation”.

«
...
4
5
6
7
8
...
»

Содержание 5400 KL





































































Отзывы:

Нет отзывов