Agria 5400 KL Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 68

Agria 5400 KL Скачать руководство пользователя страница 13

agria

Power Mower 5400

13

1. Safety Instructions

Read and observe enclosed instruc-
tions.

Before you dispose of opened and
seemingly empty pressurised tins (e.g.
of assist-starting liquids) make sure they
are completely empty. Empty them in
ventilated places safe from spark for-
mation or flames. If necessary, dispose
of tins in hazardous waste deposits.

Be careful when draining hot oil, dan-
ger of burns.

Make sure oil is of specified quality. Stor-
age is in approved cans only.

Dispose of oil, greases, and filters sepa-
rately and properly.

Tyres and Tyre Air
Pressure

When working on tyres, make sure
power mower is parked properly and
secured against rolling off.

Any repairs are to be carried out by
trained mechanics only and with the
appropriate tools.

Regularly check tyre air pressure. Ex-
cessive pressure may cause bursts.

Use appropriate tyre air pressure when
fitting weights or implements.

Re-tighten attachment bolts of drive-
wheels or check tightness when doing
maintenance work.

Electrical System

Persons having a pacemaker must not
touch live parts of ignition system when
the engine is running!

Explaining of Warning
Signs

Before any cleaning, maintenance, and
repair work switch off the engine and
pull spark plug connector.

With engine running, keep at a safe dis-
tance from cutting tools!

Signs

When working with the
machine, wear individual
protective ear plugs.

Wear protective gloves.

Wear solid shoes.

1

«
...
11
12
13
14
15
...
»

Содержание 5400 KL





































































Отзывы:

Нет отзывов