Agria 5400 KL, Руководство по эксплуатации, Страница: 25 / 68

agria Power Mower 5400 25
3. Devices and Operating Elements
M 8 = 23 Nm
M12 = 76 Nm
1 Mower hood
2 Planetary mowing drive
3 Hex bolt M 8 x 22; 2 x
4 Hex bolt M 8 x 16; 2 x
5 Wedge washer; 4 x
6 Knife driver for Universal- and Municipal
cutter bar
7 Hex bolt M 8 x 20; 2 x
8 Wedge washer; 2 x
9 Knife driver for finger cutter bar
10 Grass distributor
11 Wedge washer; 2 x
12 Hex bolt M 8 x 16; 2 x
13 Hex bolt M12 x 30; 4 x
14 Ball spring ring; 4 x
15 Hex nut M12; 4 x
16 Cutter bar
17 Knife guard
Mounting Cutter Bar
Switch off engine,
Remove spark plug
connector!
Wear safety
gloves!
1 Mount the knife driver
onto the cutter bar.
a) Universal-SC- and
Municipal cutter bar
(Pos. 3 - 6)
b) Finger cutter bar
(Pos. 7 - 9)
2 Mount the cutter bar
(16) onto the planetary
moving drive (2).
- Universal- and finger
cutter bar
(Pos. 13 - 15)
- Municipal cutter bar
(Pos. 13 - 14)
3 Mount the grass dis-
tributor (10).
Dismounting the cutter bar
In reverse order.
Exchanging Mowing Knives
Refer to operating
instructions cutter bar
W
Switch off engine, Remove
spark plug connector!
Wear safety gloves!
1 a
1 b
2
3
Required cutter bars:
Item no. 5547 011 - 5547 821
(depending on version)
Accessories for cutter bar::
Running bases
Grass distributor
I
The cutter bar is exposed to
extreme strain. Therefore, it evi-
dently must be maintained and adjusted
with special care.
3
Planetary Mowing
Attachment
Centrally driven planetary mowing
drive
Stroke: ..................................... 85 mm
Crank stone ............................. 45 mm
54,55