AGL Encore Maxim, Руководство оператора

Страница: 8 / 73

Operation
4-2
Right Front Control Panel
The right front control panel looks like the figure below.
Figure 1 Right Front Control Panel
Main Roller Controls:
The rocker switch will open and close the main nip rollers. The switch will illuminate when the rolls are
selected to close. The pressure guage is an indicator of how much pressure is being supplied to the nip
roll cylinders. This pressure is critical to your processes, therefore the pressure guage gives an accurate
repeatable reference for quality product runs on your laminator. The regulator adjusts the pressure to the
nip roll cylinders, clockwise to increase the pressure, counterclockwise to decrease pressure.
Speed/Counter:
The speed display will show the laminator speed in feet per minute. The display can also display linear
feet of material used by pressing the "Sel" button to toggle between the speed and counter display. The
display will show an "R" in the left side if the rate display is selected. If the display is in counter mode, the
counter can be reset by pressing the "Rst" button. The display will go to 0 and begin counting up again.
Power Indicator:
The power indicator light shows that power is supplied to the machine. If an emergency stop occurs, this
light will go out.