AGL Encore Maxim, Руководство оператора, Страница: 12 / 73

Operation
4-6
Web Tension adjust
The brakes on your machine are located on the unwind shafts near the left hand side of the machine.
The brakes use compression of the delrin block on the shaft to create back tension on the web. For best
results when laminating use the least amount of tension as possible for your application. The knob on the
block will increase tension when turned clockwise and decrease tension when turned counterclockwise.
The 10 bar LED display located near the brake will move up as tension increases (more lights will be
visible). This is a good reference for repeatable tension settings from process to process. The brake
assembly is shown below.
Figure 5. Brake Assembly
Windup Stations
The windup stations are used to take material up. The liner windup station which is located in front and
above the nip rolls is used to windup the release liner of pressure sensitive film. There is also a product
windup station available that winds up the finished product after it exits the pull rolls. This windup station
is located underneath the pull rolls. The adjustment disc for these stations is located on the right hand
side. The knurled disc is rotated away from the operator to increase the friction drive an toward the
operator to decrease the friction drive. The adjustment disc assembly is shown below:
Figure 6. Windup adjustment assembly