AGL Encore Maxim, Руководство оператора

Страница: 10 / 73

Operation
4-4
Rear Control Panel
Figure 3. Rear Control Panel
Pull Roller Controls:
The rocker switch will open and close the main nip rollers. The switch will illuminate when the rolls are
selected to close. The pressure guage is an indicator of how much pressure is being supplied to the pull
roll cylinders. This pressure is critical to your processes, therefore the pressure guage gives an accurate
repeatable reference for quality product runs on your laminator. The regulator adjusts the pressure to the
pull roll cylinders, clockwise to increase the pressure, counterclockwise to decrease pressure.
Reset Switch:
This switch is for initial startup and resetting the machine after it has had an emergency stop. The button
must be pressed and held for 15 seconds to allow the machine to go through a diagnostic setup.