Agilent Technologies WireScope 350 Скачать руководство пользователя страница 125 | Manualshive

Страница: 125 / 155

Agilent Technologies WireScope 350 Скачать руководство пользователя страница 125

Chapter 15

WireScope 350 System Settings 124

The site database

The site database tool allows you to maintain site-related information in the
WireScope 350 database. Using this tool, you can add and configure a new site,
edit the characteristics of an existing site, or delete sites and all of the records
saved for that site.

From the database menu screen, press the

Site

button. The first site database

setup screen will appear.

Creating or editing sites

You can create or edit site information by selecting the corresponding choice
and pressing

or the

Next

button. The number after the site name is the

number of results saved for that site. When creating a new site, you must enter a
name for the site and select and specify the cable label format and characteristics
as detailed in Chapter 4 (

Site Settings

).

NOTE:

You cannot change the name of an existing site file. This restriction is
necessary to maintain the integrity of site databases.

Deleting sites

You can delete a site file from this screen by selecting the site and pressing the

Delete

button.

CAUTION:

Deleting a site file deletes all of the test results saved for that site. Once you
delete a site file, there is no way to recover any test results that had been
saved to that site file.

«
...
123
124
125
126
127
...
»

Содержание WireScope 350




























































































































































Отзывы:

Нет отзывов