Agilent Technologies W2642A, Быстрый старт

Страница: 21 / 44

Rev. AP12 W2642A Quick Start Guide
Enabling the AUX Channel Control function
After you have set the IP address you will have to enable the AUX Channel Controller functionality in the W2642A
in order to use the W2642A GUI. The Agilent Applications can enable the AUX Channel Controller functionality
but you can also enable the function through the W2642A command line. Use the following procedures. r functionality in the W2642A
in order to use the W2642A GUI. The Agilent Applications can enable the AUX Channel Controller functionality
but you can also enable the function through the W2642A command line. Use the following procedures.
To enable the AUX Channel Controller function: To enable the AUX Channel Controller function:
1. Establish a connection to the W2642A over the Ethernet/IP interface by opening up a web browser and enter
the W2642A’s IP address into the address entry field.
1. Establish a connection to the W2642A over the Ethernet/IP interface by opening up a web browser and enter
the W2642A’s IP address into the address entry field.
The W2642A web home page will appear in the browser: The W2642A web home page will appear in the browser:
Figure 3-5 – W2642A Web Home Page
2. Click on the item called CMD Terminal .
The command terminal will appear in a browser as shown below:
Page 20