Agilent Technologies W2642A, Быстрый старт

Страница: 16 / 44

W2642A Quick Start Guide Rev. AP12
Page 15
5. Calibrate the Stressed Signal Generator setup with the Agilent Infiniium DSA90000A Digital Signal Analyzer.
6. Establish a communication session between Agilent J-BERT N4903 with the N5990A-155 Receiver Test
Software and the W2642A AUX Channel Controller over the Ethernet (LAN) interface.
7. Enable the AUX Channel Control function in the W2642A (See Enabling the ACC function below).
Test Setup
This subsection describes the test setup for testing DisplayPort Sink devices. The following is an illustration of the
setup for testing DisplayPort sink devices. The MOI, 5989-9147EN addresses the detailed requirements to
greater degree than can be shown here.
Figure 3-1 – Test Setup for Sink Tests