Agilent Technologies SIPS 10, Руководство пользователя

Страница: 30 / 82

Installation
30 Agilent Sample Introduction Pump System SIPS 10/20 User’s Guide
Figure 3 The rear of the electronic control module
Cabling
Connecting to the Agilent AA/Computer
The electronic control module is connected to the Agilent AA by an
IEEE-488 cable. Attach one end of the IEEE-488 cable supplied to the
electronic control module (the appropriate port is clearly labeled),
and the other end to the port on the back of the computer. For
Agilent 50/55 AA instruments, which do not require a computer, plug
the IEEE-488 cable into the IEEE port on the rear of the instrument.
NOTE
If you are using an Agilent 280FS AA or 140/240 AA
4
, the IEEE-488 connection
is built into the instrument.
Connecting to the SIPS Unit
The SIPS pump unit is connected to the electronic control module via
an interconnecting cable with 25-pin D-range connectors at each end.
4 Factory fitted option
Power switch
Mounting plate