Agilent Technologies InfiniiVision 6000 Series Скачать руководство пользователя страница 326

Страница: 326 / 368

326

6000 Series Oscilloscope User’s Guide

Saving and Printing Data

The

Invert Graticule Colors

option can be used to reduce the

amount of black ink it takes to print oscilloscope images by
changing the black background to white.

Invert Graticule Colors

the default mode.

Invert Graticule Colors

is available when the

BMP and PNG formats are selected.

Palette

Press the

Palette

softkey to change the following options. The

Palette options are available when the BMP and PNG formats
are selected.

•

Color

— When

Color

printing is selected, the traces are printed

in color. Color printing is not applicable to CSV format.

•

Grayscale

— When

Grayscale

printing is selected, the traces are

printed in shades of gray rather than in color. Grayscale
printing is not applicable to CSV format.

Length Control

The

Length

softkey is available when the CSV, ASCII XY, BIN, or

ALB formats are selected.

Length

sets the number of data points

that will be output to the file.

Length

can be set to 100, 250, 500,

or 1000 when the acquisition is running, or more when the
acquisition is stopped. However, if serial decode is on, the full
record length is always output.

Only displayed data points are output. Therefore, adjust the
Horizontal controls to display the data you want to save.

Graticule Not Inverted

Graticule Inverted

Содержание InfiniiVision 6000 Series

















































































































































































































































































































































































Результаты поиска

Содержание InfiniiVision 6000 Series

Отзывы:

Agilent Technologies InfiniiVision 6000 Series, Руководство пользователя, Страница: 326 / 368

Результаты поиска

Содержание InfiniiVision 6000 Series

Отзывы: