Agilent Technologies Infiniium 90000 A, Руководство по обслуживанию

Страница: 105 / 148

Chapter 5: Replacing Assemblies
To remove and replace the touch screen, the front deck, and the controller assembly
105
6
To remove the front deck off the chassis, remove four Torx T10 screws from the front
deck (two on the right hand side and two on the left hand side) - See Figure 5-24.
Figure 5-24
7
Turn the oscilloscope upside down or on its side and look through the bottom cavity
to see the SMA connectors attached to the front deck (Figure 5-25). Remove these SMA
connectors with a wrench.
Figure 5-25
8
Feed cables through any openings that are required and remove the front deck from
the frame (Figure 5-26).