Agilent Technologies BenchBot, Инструкция по безопасности и установке

Страница: 37 / 72

27
2 Laboratory setup requirements
Safety equipment space requirements
BenchBot Robot Safety and Installation Guide
Three M6 screws (supplied) are required to hold each lightpost to the
integration plates. The following diagrams and table show the spacing of the
holes for the screws. The lightpost can be mounted at either the corner or side
of the integration plates.
Figure Lightpost mounting holes for corner mount
Figure Lightpost mounting holes for side mount
3.8 cm 3.8 cm
7.6 cm
7.6 cm
Mounting requirement Measurement
Screw type M6 socket- head cap screw
Number of screws 3 per lightpost
Hole distance (center to
center) 3.8 cm (1.5 in) corner mount
7.6 cm (3.0 in) edge mount