Agilent Technologies B2200A, Руководство пользователя

Страница: 168 / 234

5-42 Agilent B2200 User’s Guide, Edition 2
SCPI Command Reference
[:ROUTe]:SYMBol:CHANnel
[:ROUTe]:SYMBol:CHANnel
In the GPIB local mode, the B2200 uses 01 to 48 (two digits numbers) to specify the
output ports (channels) 1 to 48 respectively. This command specifies a symbol string
and lets the B2200 use the specified string instead of the two digits number. The
query returns the symbol string.
Maximum value of the two digits number depends on the B2200 configuration. It is
12 for the normal configuration mode or the auto configuration mode with one
matrix card, 24 for the auto configuration mode with two matrix cards, 36 for the
auto configuration mode with three matrix cards, or 48 for the auto configuration
mode with four matrix cards.
Reboot, *RST, and :SYSTem:CPON clear the symbol strings. After that, the initial
symbol string (two digits numbers 01 to 48) will be set.
Syntax
[:ROUTe]:SYMBol:CHANnel
card_number
,
channel_number
,'
string
'
[:ROUTe]:SYMBol:CHANnel?
card_number
,
channel_number
Query response string <newline><^END>
Example
OUTPUT @Agb2200;":ROUT:SYMB:CHAN 0,10,'GATE'"
OUTPUT @Agb2200;":ROUT:SYMB:CHAN? 0,10"
ENTER @Agb2200;A$
This example assigns the string
GATE
to the output port 10. After that,
GATE
is used
instead of
10
. In this example,
A$
will be
GATE
.
Parameter Explanation
card_number For Auto Config mode:
0
or
ALL
For Normal Config mode:
1
,
2
,
3
,
4
, or
ALL
ALL
is not available for query.
channel_number Output port number:
1
to
48
for Auto,
1
to
12
for Normal.
string Symbol string set to the specified output port (channel).
Maximum 6 characters.
Numeric characters, alphabetic characters; upper case and
lower case, space, and the following symbols are available.
! " # $ % & ’ ( ) * + , - . / > ? : ~ ; < = > ? @ [ \ ] ‘ { | } ^ _