Agilent Technologies Agilent E5810A, Руководство пользователя

Страница: 56 / 177

56 Chapter 2
Installing the E5810
Installing the E5810 on an Enterprise Network
4
Set E5810 for DHCP Enterprise Network Operation.
For an Enterprise
network that supports DHCP, the only values you may need to set are
the Hostname and Universal Plug and Play (UPnP) settings, as
provided to you by your System Administrator, on the
Configuring your
E5810 LAN/GPIB Gateway
page.
Where to go Next
Go to “Verifying Instrument Communication.”
Hostname
Enterprise Network Supports DNS
If the network supports dynamic DNS,
enter the Hostname provided by the System
Administrator. Then, you can access the
E5810 from your Web browser by using the
Hostname.
If the network supports DNS, enter the DNS
Server IP Address provided by the System
Administrator.
Enterprise Network Does Not Support DNS
No action required. Hostnames are not
supported. Use only the IP address when
communicating with the E5810.
Universal Plug and Play (UPnP)
UPnP Enabled is Allowed on Enterprise
Network
No action is required for the E5810. However,
if you want to see the E5810 in My Network
Places, you may need to enable
UPnP on your computer’s Operating System.
UPnP Enabled is not Allowed on Enterprise
Network or You do not Want the E5810 to be
Displayed in My Network Places.
Set Universal Plug and Play to OFF.