Agilent Technologies Agilent E5810A, Руководство пользователя

Страница: 106 / 177

106 Chapter 3
Using E5810 Web Access
Other Web Access Functions
c The LAN LEDs should light, indicating LAN activity is taking place.
The firmware for the E5810 is ~ 5.1 MB. Download time may vary,
depending on network connections.
d After the firmware image has been downloaded into the E5810,
the E5810 will automatically reboot and display a "
Rebooting
E5810..
." message. The E5810 then begins a normal startup
sequence.
9
Verify Firmware Revision.
When the E5810 has successfully rebooted,
display the E5810
Welcome
page and verify that the
Firmware Revision
Number
displays the correct version of the firmware.
Troubleshooting
Guidelines
The E5810 records information on the firmware update process in a
system
log
that is viewable through the E5810 Web access or through the E5810
Telnet interface.
1
View the System Log From Web Access.
To view the system log
information on the E5810 Web access, on your Web browser address
line, type:
http://< IP Address >/systemLog.htm
where
< IP Address >
is the IP address shown on the E5810 front panel
display and press
Enter
to display the system log. After a successful
firmware update, the E5810 systems log should show normal startup
messages, such as:
(0:00:00:00) Selftest passed
(0:00:00:00) GPIB: Initialized, symbolic name = gpib0
(0:00:00:00) RS232: Initialized, symbolic name = COM1
OR
1
View the System Log From Telnet.
To view the system log from Telnet,
click
Start
and select
Run...
. Then, type "telnet < IP_Address >", where
< IP_Address > is the IP address shown on the E5810 front panel
display. See Appendix C - Using the Telnet Utility for additional
information on the Telnet utility. When the telnet client has started, you
can view the system log by typing '
syslog-display
'. After a successful
firmware update, the E5810 systems log should have normal startup
messages, such as:
(0:00:00:00) Selftest passed
(0:00:00:00) GPIB: Initialized, symbolic name = gpib0
(0:00:00:00) RS232: Initialized, symbolic name = COM1