Agilent Technologies Agilent E5810A, Руководство пользователя

Страница: 45 / 177

Chapter 2 45
Installing the E5810
Configuring the E5810 on a Local Network
Apply Power to the
E5810
After connecting the E5810 to a Local network, plug the E5810 AC power
cord into an AC outlet and observe the power-on sequence. When the
power-on sequence is complete, the default IP address of the E5810 is
displayed on the second line of the front panel display. A typical display
follows. See
Chapter 1 - E5810 Description for power-on sequences.
NOTE
Local networks may not have a DHCP Server. Since, by default, the
E5810 tries to find a DHCP server until a timeout value is reached, it
may require up to 75 seconds for the E5810 to display its default static
IP address (169.254.58.10).
NOTE
The E5810 detects duplicate IP addresses and will not start operation
if its IP address is already in use. If you try to simultaneously attach
multiple E5810s without changing each unit’s default static IP address,
some E5810s may not start operation.
To prevent this from happening, add a single E5810 at a time to the
network and configure each E5810 to a unique IP address before adding
additional E5810s.
IP Address and Hostname Displayed
Display shows IP address (and Hostname, if known)
Activity
LAN GPIB RS232
Power Fault
Preset
E5810A
LAN/GPIB Gateway
Hostname
169.254.58.10