Agilent Technologies Agilent E5810A, Руководство пользователя

Страница: 104 / 177

104 Chapter 3
Using E5810 Web Access
Other Web Access Functions
2
Install FTP Server, if Needed.
You will need to access a standard FTP
Server program. See “Troubleshooting Guidelines” in this section for
tips to access a standard FTP Server.
3
Set up User Account Information for FTP Server.
Refer to the FTP Server
documentation on creating a user account and a password. The user
account is used for the login name.
4
Copy E5810 Firmware Image to FTP Directory.
Once you have a FTP
login, copy the E5810 firmware image to the directory on the FTP
Server's file system that is associated with the user account as set up
in Step 3. Then, manually start the FTP Server, if needed.
5
Verify the E5810 is Idle.
Updating the E5810 is a significant activity.
Be sure no other user or program is using the E5810 before you attempt
to update the firmware. You can check the number of open sessions by
displaying the
E5810 LAN/GPIB Gateway Status
page. To open this page,
click the
Session Status
icon on the Navigation Bar. We also recommend
you reboot the E5810 before beginning the firmware update process.
6
Open the Updating Firmware Page
a Open E5810 Web Help and click Updating Firmware from the Table
of Contents to prompt for a password and then display the
Updating Your Firmware
topic page.
b Click the updating firmware hyperlink on this page to display the
Updating Firmware on your E5810 LAN/GPIB Gateway
dialog box.
A typical dialog box display follows on the next page.
.
NOTE
You can also directly access the
Updating Firmware on your E5810 LAN/
GPIB Gateway
page at http://<IP_Address>/html/passwordupdate.html,
where <IP_
Address
> is the IP address displayed on the front display
panel on the E5810.