Agilent Technologies 83236B, Руководство по эксплуатации, Страница: 49 / 164

49
Chapter 2, Installation
When Used with Agilent 8920A,B and Controlled via GPIB for TDMA Subscriber Unit Tests
Figure 12 Connection diagrams for the Agilent 8920 Test Configuration (TDMA Subscriber
Unit Tests; GPIB Control)
POWER
FROM DUPLEX OUT TO ANT IN
8 323 6B
P C S I N T E R F A C E
RF IN/OUT RF OUT only
TEST SET
1.8-2.0 GHz UUT
ON OFF
PWR REF
UNLOCK
ANALYZER ANALYZER ANALYZER GENERATOR
DATA
CLOCK IN
BASEBAND
DATA IN
TRIGGER
IN
BASEBAND
DATA IN
114.3 MHz IF IN REF IN 10 MHz REF OUT
CW
RF IN
IQ
RF OUT
FRAME
EXT
IF IN
CONTROL I/O
DIAG
OUT
GEN BB
DATA OUT
ANL
TRIG OUT
BIT CLK
OUT
SYMBOL
CLK OUT
OFF-CHANNEL
PULSE
MOD
CLK OUT
From Agilent 8920 ANT IN
To Agilent 83236 TO ANT IN
(Cable P/N 83236-61603)
From Agilent 83201 or 83206 REF IN
To Agilent 8920 10 MHz REF OUTPUT
(Supplied with cellular adapter)
To Agilent 8920 10 MHz REF OUTPUT
(BNC “T” adapter P/N 1250-0781)
From Agilent 8920 10 MHz REF
OUTPUT
To Agilent 83236 REF IN
(Cable P/N 8120-1839)
From Agilent 8920 GPIB
To Agilent 83236 GPIB
(Mod. No. Agilent 10833D)
From Agilent 8920 DUPLEX OUT
To Agilent 83236 FROM DUPLEX OUT
(Cable P/N 83236-61603)
RF IN/OUT
ANT
TDMA
Subscriber
Unit
(User-supplied cable)
From Agilent 83201 or 83206
FRAME CLK OUT
To Agilent 83236 EXT TRIG IN
(Cable P/N 83215-61644)
To Agilent 83236 REF IN
(BNC “L” adapter P/N 1250-0076)
Connections between
the Test Set and Cellular
Adapter are not shown
in this figure.
Note: