AGI NECO D16106, Инструкция по сборке, Страница: 55 / 122

7713397 R2 55
Figure 48. Support Legs
“C” LEGS
COLUMN
“B” LEG(S)
CENTER
“A” LEGS
OUTER & INNER
Important
Be sure to torque all legs properly as they are being installed. Then, double-check torque values upon
completion.
Figure 49. Using Shims
USE SHIMS, AS NEEDED
Outer Legs and Inner Legs
1. Use 5/8" x 1-½" hardware.
2. While the dryer lower section is hanging from a crane or setting on blocks, bolt the “A” outer side legs only
around the outside perimeter of the dryer frame.
3. Once the “A” side legs are mounted around the outside, mount the inner “A” side legs to the inside frame
positions.
CONTINUOUS-FLOW GRAIN DRYER – COMMANDER CONTROL 4. ASSEMBLY