Aesir copenhagen AE+Y, Руководство пользователя

Страница: 21 / 33

2 1
U S I N G T H E Æ ± Y P H O N E
Bluetooth
You will need a Bluetooth headset or Bluetooth enabled
car to pair with your Æ+Y phone.
Follow the instructions in your device manual to put
your device to pairing mode, so that it can be paired and
connected to the Æ+Y phone.
To activate Bluetooth, go to
Menu \ Settings \ Bluetooth
and select On from the pop-up menu. Select your device
from the Device list menu and select Pair . You will need
to enter a code for the device: check your Bluetooth
device manual for this. Select
OK . Once pairing is
confirmed, select Connect from the pop-up menu. The
display will show that your device has been connected.
Press
OK to confirm. Audio is now routed to the device
rather than the phone’s earpiece.
Master reset
Master reset will restore the phone to its original factory
settings. It will delete all the contacts in your phone’s
Contacts but will not delete the contacts or text messages
stored on your SIM card. Go to Menu \ Settings \ General \
Master reset.
Forced reboot
If the phone does not respond, you can perform a forced
reboot. Press the
5-way navigation key and the End key
simultaneously for four seconds. If a forced reboot is
initiated while, for example, copying contacts or sending
a text, information may be lost.
Startup animation
The startup animation can be turned on or off. Go
to
Menu \ Settings \ General \ Startup animation and
select from the pop-up menu. If activated, the startup
animation will play. If set to
Off , a static image will be
shown during startup.
Networks
Go to Menu \ Settings \ Connections \ Networks \ Operator
selection . Select Automatic from the pop-up menu
to automatically connect to your network, or, if you
are outside your home country, your network service
provider’s roaming partner, if available. Select
Manual
from the pop-up menu to manually select a network.
Some SIM cards may have restricted access to networks
outside your home network.