9
1.
Go over all seams and color overlaps with
your sealing iron.
Note:
Even if your models covering has no
wrinkles out of the box it is still very important
to go over all seams and overlaps to make cer-
tain they are sealed securely. This is espe-
cially important at the leading edges of the
wings and stabs. We recommend checking the
covering after each flying session.
CHECKING SEAMS AND COLOR OVERLAPS FOR GOOD SEAL
2.
Use your covering iron to ensure all edges,
seams, and color overlaps are securely sealed.
3.
This is an optional step but is recommended
.
Cut strips of the supplied clear covering to fit
the hinge gaps. Use covering iron to seal the
clear covering snugly into the bottom of the
hinge lines as shown for air tight hinge seals.
IMPORTANT
:
It is the users responsibility to check the
covering seams and overlaps for security
and a good seal. Aeroworks is not re-
sponsible for failure of covering seams or
overlaps during flight.
This is a never ending process that
must be done after each flying
secession. Due to varying tempera-
tures and humidity changes from
day to day the covering will
continue to loosen and must be
maintained.
