30
16.
Re-attach ball link to rudder control horn on
both sides of the rudder.
17.
With radio on, and rudder centered, adjust rud-
der pull-pull cables to desired tension by
screwing in or out on the threaded couplers
and or ball links. Make all adjustments with
the rudder servo still powered up. Ensure the
servo does not bind at center or at either end
point.
Tail Wheel Installation
1.
Gather the tail wheel parts shown below.
Tail wheel strut and leaf spring, 3 tail wheel
mounting screws, steering tiller, 2 tiller
mounting screws, and 2 steering springs.
2.
Apply a drop of thick CA to the tiller arm
mounting screws before inserting in the
pre-drilled holes.
