Advantech-DLoG DLT-V83 Series Скачать руководство пользователя страница 136

Страница: 136 / 157

Optional equipment/accessories

136 / 157

DLT-V83 Operating Instructions V2.00

16.

Optional equipment/accessories

16.1.

Integrated UPS (optional)

DLT-V83 Industrial Computers are optionally available with an integrated Uninterruptible Power Supply

(UPS). The lithium-ion battery packs of the UPS are located in the cable cover of the DLT-V83.

Fig. 16.1: Cable cover with integrated battery packs for the UPS

WARNING

Personal injury from battery packs: Short-circuit, fire, chemical burns, toxic substances.

The integrated UPS battery packs in the cable cover of the DLT-V83 can ignite if handled

improperly (risk of fire), cause chemical burns or release toxic substances.



Handle the cable cover carefully.



Do not allow water or other liquids to come into contact with the device (exercise particular

caution with corrosive liquids).



Ensure that no liquids or foreign bodies get into the cable cover.



Provide sufficient ventilation.



Do not allow the device to come into contact with fire or operate it close to sources of heat

or fire, open flame or heaters.



Observe the specific IP protection class.



Only use the DLT-V83 within the permitted temperature and humidity range.



Do not subject it to strong impacts and vibrations that exceed what is specified by the

class 5M3/5M2 (DIN EN 60721-3-5).

Содержание DLT-V83 Series






























































































































































Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды

Advantech-DLoG DLT-V83 Series, Руководство по эксплуатации

Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды