Advantech-DLoG DLT-V83 Series Скачать руководство пользователя страница 10

Страница: 10 / 157

Unpacking, transporting, storing DLT-V83

10 / 157

DLT-V83 Operating Instructions V2.00

Unpacking, transporting, storing DLT-V83

4.1.

Unpacking



Open the packaging carefully.



Save the packaging material (for possible forwarding transports or returns of the DLT-V83).



Check the shipment for completeness and any possible damage.



Always keep the supplied operating instructions and documents.

4.2.

Transporting

WARNING

Personal injury from battery packs: Short-circuit, fire, chemical burns, toxic substances.

Devices with integrated UPS (optional) contain lithium-ion battery packs (hereinafter referred to

as: battery packs). These can ignite if handled improperly (risk of fire), cause chemical burns or

release toxic substances.



Be careful when handling battery packs.



Do not drop or damage battery packs.



Do not allow water or other liquids to come into contact with the device (exercise particular

caution with corrosive liquids).

Risk of injury due to the weight of the device.

The DLT-V83 can fall down and cause injuries due to its weight.



Always hold the DLT-V83 by the housing with both hands.



Never use the antenna cap as a handle. It can break due to the weight involved.



Use the assistance of a second person for installation work.

Risk of injury due to sharp-edged parts on the device.

The strain relief rail of the DLT-V83 can have sharp edges and cause cutting injuries.



Do not hold the DLT-V83 by the strain relief rail.

If a return/repacking is necessary

If the DLT-V83 is being returned to the manufacturer, a completely filled-out return shipment

form must be enclosed with every DLT-V83.

You can find the return shipment form at the end of this operating instructions and on our

websites.



Repackage the device using suitable packaging material to ensure that the device is not

damaged during transport.



For devices with integrated UPS/battery packs, comply with the transport conditions for

battery packs.



Use the required package labels and accompanying documents.

Содержание DLT-V83 Series






























































































































































Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды

Advantech-DLoG DLT-V83 Series, Руководство по эксплуатации

Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды