Advantech-DLoG DLT-V83 Series Скачать руководство пользователя страница 48

Страница: 48 / 157

Open/close antenna (or protective cap)

48 / 157

DLT-V83 Operating Instructions V2.00

Open/close antenna (or protective cap)

The DLT-V83 is normally equipped with an antenna for radio operation. Devices without radio operation

have no antenna and instead have what is known as a "protective cap".

The following interfaces are located underneath the antenna or protective cap:

−

Service USB

−

CFast

−

Mini SIM card slot

8.1.

Avoid Property damage

NOTICE: Property damage

Protective caps or antennas:

−

are only permitted to be removed for servicing purposes, e.g. to install software updates.

−

are only permitted to be removed by qualified expert personnel.

No objects or liquids are permitted to enter the opened DLT-V83.

The device is only permitted to be operated again once the protective cap or antenna is

properly sealed again; only then is the protection class guaranteed.

When opening and closing, proceed as described in the sections below.

8.1.1.

Disconnecting from the electric power source

−

Switch off the DLT-V83 before the protective cap or antenna is removed.

−

Only insert/remove the mini SIM card, CFast card and USB stick when the device has been

completely de-energized.

Please note

: For DLT-V83 devices with integrated UPS the device may be in operation despite the

disconnecting device being actuated, since it is supplied with power by the UPS. Likewise, the

peripherals that are supplied by the device are also not currentless as long as the DLT-V83 is being

provided with power by the UPS.

8.1.2.

Tools required

To open the following component:

Use this tool:

Protective cap

−

3mm Allen wrench

4 in 1 multi-band antenna

Low profile WLAN antenna (low)

−

Torx screwdriver, Tx20

−

Allen key (size 7)

All high profile antenna (high)

−

Allen key (size 3)

Содержание DLT-V83 Series






























































































































































Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды

Advantech-DLoG DLT-V83 Series, Руководство по эксплуатации

Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды