Advantech-DLoG DLT-V83 Series Скачать руководство пользователя страница 134

Страница: 134 / 157

Attaching the cable cover

134 / 157

DLT-V83 Operating Instructions V2.00

15.3.1.

Attaching the cable cover (without integrated UPS)



Carefully mount all cables, see

Section15.3. Attaching cable grommets

and

fixing strain relief in place



Place the cable cover in the DLT-V83

housing slot.



Loosely tighten the 4 cylinder head screws

ISO 4762-M4x10-A2 of the cable cover.



Then fully tighten the screws with 3 Nm

torque crosswise.

Fig. 15.10: Screwing the cable cover into place

15.3.2.

Attaching the cable cover (with integrated UPS)

WARNING

Hazardous voltage, electric shock from contact with live parts.

Before connecting and disconnecting the cable cover with UPS, the DLT-V83 must be

currentless.



Shut down the DLT-V83 properly.



Disconnect the main power supply cable from the power supply.



If the DLoG Config configuration was set to also start the DLT-V83 without the <Power>

button and ignition, this setting must first be changed. Otherwise, the DLT-V83 will

automatically restart after a short pause.



Carefully mount all cables, see

Section15.3.

Attaching cable grommets and

fixing strain relief

in place



Hold the cable cover to the bottom edge of the

DLT-V83 as shown in the illustration.

The connecting cables of the UPS must point in

the direction of the connector panel.



Insert the plug with the detent lug, correctly

oriented, into the connector panel socket marked

UPS optional

Fig. 15.11: Cable cover with
integrated UPS battery



Place the cable cover into the housing groove of the DLT-V83.



Make sure that the battery cable is not jammed.



Loosely tighten the cylinder head screws ISO 4762-M4x10-A2 of the cable cover.



Then fully tighten the screws with 3 Nm torque crosswise.

Содержание DLT-V83 Series






























































































































































Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды

Advantech-DLoG DLT-V83 Series, Руководство по эксплуатации

Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды