Advantech-DLoG DLT-V83 Series Скачать руководство пользователя страница 8

Страница: 8 / 157

Functional description

8 / 157

DLT-V83 Operating Instructions V2.00

Functional description

3.1.

Intended use

DLT-V83 Industrial Computers are data

communication terminals for use in

commercial environments (e.g. logistics,

warehousing, manufacturing). Any other

or additional use beyond this shall be

deemed an improper use. The

user/operator of the DLT-V83 is solely

responsible for any resulting damage.

This also applies to any unauthorized

modifications made to the device.

Indented use includes the compliance

with all safety instructions and the

compliance with the approved

environmental conditions and

specifications for the device.

The DLT-V83 Industrial Computers:

−

are not approved for use in EX zones (potential explosion hazard).

−

are not approved for use on ships.

−

are not approved for use on railed vehicles.

−

are not approved for use in life-support systems or critical safety systems where system malfunction

can lead to the direct or indirect endangerment of human life.

Accessories

Only use accessories that have been tested and approved for the respective DLT-V83. Otherwise, any

warranty for this device will be void.

Requirements for safe operation

The requirements are:

−

Proper transport and storage.

−

Proper setup and use.

−

Proper maintenance and service.

−

Operation by trained personnel.

Содержание DLT-V83 Series






























































































































































Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды

Advantech-DLoG DLT-V83 Series, Руководство по эксплуатации

Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды